|Build Your Own House
|Sealing roofs and walls to meet bushfire regs
|Page 1 of 1|
|Author:||olmeri [ Mon Sep 26, 2011 12:16 pm ]|
|Post subject:||Sealing roofs and walls to meet bushfire regs|
Campbell Shed Products in Grafton NSW make pre-cut metal flashings which meet the new bushfire regulations. One sits up under the ridgecap, another goes behind gutters or at eaves, another that fits on corrugated corners. They are a good looking product, and can be done in zinc and all the colourbond colours. They can be cut to suit the type of material you are using and to fit the roof pitch. The flashings can be done with a new building or retrofitted to an existing building. They have a website http://www.shedproducts.com which shows all the different flashings. They also make floor level vermin seals for sheds, pvc and metal. You can get their products at many shed retailers, also at Tradelink stores and online. If you can't find it, there are contact details on the website and they will point you in the right direction. They are an Australian company that uses Australian products. I have used the vermin seal and it definitely works.
|Page 1 of 1||All times are UTC + 10 hours|
|Powered by phpBB® Forum Software © phpBB Group